23
3
► TPM SUPPORT
This item is used to decide whether to support TPM (Trusted Platform Module) device func-
tion. Default option is [Disabled]. If you want to support TPM, rst you need to install a TPM
device on the motherboard and set this item to [Enabled], then save changing and reset your
computer, otherwise the operation system can not show the relative information.
CPU Conguration
► C1E Support (Appears only when CPU supports)
C1E represents Enhanced HALT State. It is a feature which CPU uses to reduce power
consumption when in halt state. C1E drops the CPU’s multiplier and voltage to lower levels
when a HLT (halt) command is issued. This item is used to enable/disable the C1E support.
► Hyper-Threading
This item is used to enable/disable the Hyper-Threading Technology feature.
► Execute Disable Bit
This item is used to enable/disable the Execute Disable Bit feature.
Intel's Execute Disable Bit functionality can help prevent certain classes of malicious buffer
overow attacks when combined with a supporting operating system.
Execute Disable Bit allows the processor to classify areas in memory by where application
code can execute and where it cannot. When a malicious worm attempts to insert code in the
buffer, the processor disables code execution, preventing damage and worm propagation.
Replacing older computers with Execute Disable Bit-enabled systems can halt worm attacks,
reducing the need for virus-related repairs. By combining Execute Disable Bit with anti-virus,
rewall, spyware removal, e-mail ltering software, and other network security measures, IT
managers can free IT resources for other initiatives.
Version 2.10.1208. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
CPU Configuration
Intel(R) Core(TM) i3-2100T CPU @ 2.50GHz
EMT64 Supported
Max Processor Speed 2500 MHz
Min Processor Speed 1600 MHz
Processor Speed 2500 MHz
CPU ID 206a7
Microcode Revision 14
Processor Cores 2
Intel HT Technology Supported
C1E Support [Enabled]
Hyper-threading [Enabled]
Execute Disable Bit [Enabled]
Intel Virtualization Technology [Disabled]
EIST [Enabled]
Turbo Mode [Enabled]
CPU C6 Report [Enabled]
Package C State limit [No Limit]
→ ←: Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Advanced