Note!
For a precise reading and control of power, a meter can be used instead of a CT. If the CT
is fitted in the wrong orientation, anti-backflow function will fail.
➢ RS485/Meter
-
RS 485
RS485 is a standard communication interface which can transmit the real time data from inverter to PC or
other monitoring devices.
-
Meter (optional)
The inverter has integrated export limitation functionality. To use this function, a power meter or a CT must
be installed. For Meter installation, please install it on the grid side.
Export limitation setting:
Short press the touch key to switch display or make the Value+1. Long press the touch key to confirm your setting.
To Next Page
Loading...
