S Series User Manual www.fox-ess.com P a g e | 2
1. Important Notes
1.1 Scope
This manual describes the assembly, installation, commissioning, maintenance and troubleshooting of the
following model(s) of FoxESS products:
S Series:
S700 S1000 S1500 S2000
S2500 S3000 S3300*
Note: Please keep this manual where it will be accessible at all times.
*The S3300 model is for the Indian and Polish markets only.
1.2 Target Group
This manual is for qualified personnel only. The tasks described in this manual will need to be performed by
professional, suitably qualified technicians only.
1.3 Symbols Used
The following types of safety instructions and general information appear in this document as described below:
Danger!
“Danger” indicates a hazardous situation which, if not avoided, will result in death or
serious injury.
Warning!
“Warning” indicates a hazardous situation which, if not avoided, could result in death or
serious injury.
Caution!
“Caution” indicates a hazardous situation which, if not avoided, could result in minor or
moderate injury.
Note!
“Note” provides important tips and guidance.
1.4 Symbols Explanation
This section explains the symbols shown on the inverter and on the type label：
Symbol Explanation CE mark. The inverter complies with the requirements of the applicable CE
guidelines.
Beware of hot surface. The inverter can become hot during operation. Avoid contact during
operation.
Danger of high voltages.
Danger to life due to high voltages in the inverter!
To Next Page
Loading...
