FoxESS S700-G2 - Installation; Packing List; Preparation

10
5. Installation
5.1 Packing List
Please un-pack the box, check and make sure you received all items as listed below before installation
(excluding optional items):
5.2 Preparation
- Please refer to the Technical Data to make sure the environmental conditions fit the inverter’s
requirements (degree of protection, temperature, humidity, altitude, etc.)
- Please avoid direct sunlight, rain exposure and snow build-up during installation and operation.
- To avoid overheating, always make sure the air flow around the inverter is not blocked.
- Do not install in places where gas or flammable substances may be present.
- Avoid electromagnetic interference that can compromise the correct operation of electronic
equipment.
- The slope of the wall should be within ±5°.
F G H I J
K L M N O
A B C D E
Object
Quantity
Description
Object
Quantity
Description
A
1
Inverter
I
1
Set screw
B
1
Bracket
J
1
Communication connection
C
2
DC connector (F/M)
K
1
Quick installation guide
D
1
AC connector
L
1
WiFi/LAN/GPRS (Optional)
E
3
Expansion tube
M
1
Unlock tool
F
3
Expansion screw
N
1
CT (Optional)
G
2
DC pin contact
(1*positive, 1*negative)
O
1
Meter (Optional)
H
1
Earth terminal