17
proper functionality before heading out on a trip can help you decide if
you need new batteries, if it needs service, or if everything is working
well. This can help prevent cancellation of trips and potential
disappointment.
8. Troubleshooting
The most common problems are battery related. Before doing anything
else, try installing fresh batteries. When your batteries get low, in either
the Wildfire 2 or the TX9 remote, unexpected operations can occur. You
can experience such things as loss of audio quality, loss of remote-
control range, and other abnormal results.
Problem: Wildfire 2 will Not Turn On. Solution: Make sure that you
have fresh batteries installed. If you are using rechargeable batteries,
make sure they are fully charged. Inspect your battery tray and make
sure the springs are not compressed or corroded as this could lead to
poor battery connectivity.
Problem: Wildfire 2 does not produce any sound. Solution: Check that
the speaker is not turned off. If you still cannot play sounds, connect
the Wildfire 2 to a computer and inspect the sound files for missing files
or signs of corruption.
Problem: TX9 remote not controlling Wildfire 2. Solution: See section 9
“Maximizing Remote Range”
Problem: Cannot transfer sound list to TX9. Solution: This typically
stems from an error in the play list on the Wildfire 2. If you recently
added new sounds, double-check the programming for errors such as
duplicate or missing sound numbers.
Problem: TX9 remote does not turn on. Solution: Install a new 9V
battery.
To Next Page
Loading...
