VIII.Installation Guide
Positioning Waist Belt
The positioning waist belt is for holding your hips properly against the back of the seat and must be
strapped 45° over your hips (Fig. C) to prevent the user from falling off the chair. Please wear the
waist belt at all times while seated.
Please be aware that the waist belt is not intended for use as an auto style seat belt.
The Smart Chair is not designed for being used as a seat in any forms of transportation.
You must wear the seat belt provided in all forms of transportation.
You are at your own risk and are not recommended to use the chair as a seat when taking
any forms of transportation such as cars, buses, trains, planes or ships.
CAUTION
1. Always ensure the waist belt is appropriately installed onto the chair and adjusted securely
so that it’s snug, but also comfortable enough so that it does not interfere with your breathing.
2. Always check the waist belt for any lose parts or wear and tear. If any problem is found,
contact your provider for maintenance or repair.
C
16
To Next Page
Loading...