FP Zoom TTL - Technical Specifications

21
Technical Data
Model
• Type
• Exposure Control
• Wireless Flash (Optic transmission and 2.4G transmission)
• Power Supply
• Sync Triggering Mode
• Color Temperature
• Dimensions
W x H x D
Weight without battery
Weight with battery
64 x 76 x 190 mm
410g
530g
Compatible cameras
Flash coverage
Flash duration
Exposure control system
Sync mode
Stroboscopic mode
Wireless ash function
Controllable slave groups
Transmission
range
(approx.)
Channels
Slave-ready indicator
Modeling ash
Eective range (approx.)
AA batteries 1.5v
Recycle time
Full power ashes
Power saving
Center: 0.6~10m / 2.0~32.8 feet
Periphery: 0.6~5m / 2.0~16.4 feet
Ni-MH batteries (recommended) or 4*LR6 alkaline batteries
Approx. 0.1-2.6 seconds
Approx. 230 (2500mA Ni-MH batteries)
Power o automatically after approx. 90 seconds
of idle operation. (60 minutes if set as slave)
Flashpoint Blast Power Pack BP-960
with Canon Cord FPPPBP960CA
External power
Hotshoe, 3.5mm sync line, R1 Wireless control port
5600±200k
Optical
Optical
2.4G
2.4G
3 (A, B, and C)
Indoors: 12 to 15 m / 39.4 to 49.2 ft.
100m
4 (1, 2, 3, and 4)
32 (1~32)
Two red blinking indicators
Fired with camera’s depth-of-eld preview button
Outdoors: 8 to 10 m / 26.2 to 32.8 ft.
Master unit reception angle: ±40° horizontally,
±30° vertically
Master, Slave, O
Provided (up to 90 times, 100Hz)
E-TTL II autoash and manual ash
Flash exposure
compensation (FEC)
Manual. FEB: ±3 stops in 1/3 stop increments
(Manual FEC and FEB can be combined.)
High-speed sync (up to 1/8000 seconds),
rst-curtain sync, and second-curtain sync
Guide no.
( 1/1 output @ 200mm)
FPLFSMZNK
Nikon DSLR cameras (i-TTL autoash)
20 to 200mm (14mm with wide Angle Diusion panel)
1/300 to 1/20000 second
• Auto zoom (Flash coverage set automatically to match the
lens focal length and sensor size)
• Rotating/tilting ash head (bounce ash): 0 to 360°
horizontally and -7° to 90° vertically
• Manual zoom
196 Ft, 60 Meters
@ ISO 100 200mm zoom
• Auto Focus Assist Beam