FPC BM-Lite - Run reference Python Script to test the BM-Lite

Public
Doc number:
Doc revision:
Doc state:
Date:
100021008
7.2
Approved
03/Apr/2020
Doc class:
Approver:
Page:
Instruction
17(21)
All information contained within this document is proprietary to Fingerprint Cards AB.
 When the filter installation is done, you will receive a confirmation on the successful
installation:
 Close the filter installer. Your FPC5832 board is now ready to be used.
4.4 Run reference Python Script to test the BM-Lite
With the BM-Lite release comes a .zip file named “FPC-BEP-SW-
DELIVERY_PYTHON_SCRIPTS_fpc_bm_lite_1.2.0.006.zip”. This zip file contains the Python
scripts necessary to test the functionalities of the BM-Lite module.
 Connect your BM-Lite module to the FPC5832 board as shown below.
 Unzip the “python” folder from the .zip file into the directory of your choice.
 Open a command prompt and navigate into the “python” folder you just unzipped.