FPC BM-Lite - Table of Contents

Public
Doc number:
Doc revision:
Doc state:
Date:
100021008
7.2
Approved
03/Apr/2020
Doc class:
Approver:
Page:
Instruction
2(21)
All information contained within this document is proprietary to Fingerprint Cards AB.
Contents
1 Introduction............................................................................................3
2 Development Kit Hardware ....................................................................4
2.1 BM-Lite Module ...............................................................................................................4
2.2 BM-Lite Adapter Flex Cable .............................................................................................6
2.3 FPC5924 Adapter Board...................................................................................................6
2.4 FPC5832 FTDI USB Adapter..............................................................................................8
3 Setup on Linux – Ubuntu 16.04 ..............................................................9
3.1 Install Python3 .................................................................................................................9
3.2 Install the required packages...........................................................................................9
3.3 Run reference Python Script to test the BM-Lite...........................................................10
4 Setup on Windows 7/10 .......................................................................13
4.1 Install Python3 ...............................................................................................................13
4.2 Install the required packages.........................................................................................14
4.3 Installing an SPI filter for the FTDI board. ......................................................................15
4.4 Run reference Python Script to test the BM-Lite...........................................................17
5 How to use the Python script ‘bep_ref.py’ ...........................................20
5.1 Arguments for running bep_ref.py ................................................................................20
5.2 SPI Startup example.......................................................................................................20
5.3 UART Startup example...................................................................................................20
5.4 Example procedures ......................................................................................................20