5
Safety and Warning Instructions!!
!!! Important, read before commissioning !!!
• The user must make sure that every person handling this unit
must know these operating instructions and handle the unit
accordingly.
• These operating instructions must be read thoroughly before
the unit is installed and commissioned.
• Proceed only according to these operating instructions.
• Only trained personnel should install and commission this
unit. Specific rules and regulations must be observed.
• The unit is under power and must not be opened.
• If the unit is visibly damaged it must not be installed, con-
nected and commissioned.
• Disconnect the unit immediately if it does not operate after
commissioning.
• Do observe all laws and regulations concerning this product.
Additionally all safety and commissioning instructions of the
Reactive Power Control System are to be observed.
To Next Page
Loading...
