Do you have a question about the Frama F-Link and is the answer not in the manual?
Details about network connection types and security protocols supported by the F-Link.
Describes the F-Link's default DHCP configuration for wired LAN networks.
Details on configuring a static IP address for the F-Link, requiring network details.
Information on operating the F-Link device using a wireless network connection.
Addresses common reasons for not being able to access the F-Link configuration pages.
Diagnosing issues related to F-Link's inability to connect to the Frama FO2 backend server.
Procedure to reset the F-Link to its factory default settings.
Explains F-Link status messages displayed on the franking system and their troubleshooting.