Framery Four - Install the Coat Hook(S) (Optional)

70 pages

Save Page as PDF

To Next Page

To Previous Page

Framery Four

1.14 Install the coat hook(s) (optional)

Installation instructions

info@frameryacoustics.com

Main Page

Table of Contents3
Important Safety and Product Instructions5
Preface5
Product Information5
Copyright5
Manual Contents5
Installation Requirements6
Components and Accessories6
Tools and Accessories6
Main Dimensions7
Required Operating Space7
Seismic Anchoring Requirements8
Chassis9
Assemble the Front Frame9
Assemble the Back Frame10
Install the Bottom Corners10
Install the Floor Boards11
Install the Vertical Frames13
Install the Horizontal Frames13
Install the Horizontal Supports15
Install the Back Glasses15
Tighten the Screws of the Back Glass Wall16
Install the Front Glasses18
Install the Ceiling Threshold and Plugs to the Doorway20
Install the Inlet Module21
Install the Outlet Modules22
Install the Wall Exterior Panels22
Install the Coat Hook(S) (Optional)24
Electrics25
Install the Power Unit25
Install the Core Unit26
Install the Wiring Harness26
Make the Electrical Connections29
Exterior35
Install the Roof Exterior Panels (Corners)35
Install the Roof Exterior Panels (Front & Back) and Bottom Exterior Panels35
Install the Fan Cover37
Install the Floor Exterior Panels38
Install the Floor Covers38
Install the AC Power Cord39
Route the AC Power Cord through the Floor40
Route the AC Power Cord through the Roof41
Install the LAN Cord (Optional)42
Install the Add-On Rails42
Install the Occupancy Lights43
Door44
Install the Door44
Install the Door Handle45
Inspect the Door45
Adjust the Closing Speed of the Door46
Change the Door Handedness (Optional)47
Interior51
Install the Wall Acoustic Panels51
Install the Roof Acoustic Panels51
Install the Ceiling Interior Panels52
Install the Wall Interior Panels53
Install the Lights53
Install the Carpet and Table Leg54
Install the Cable Channels57
Install the Kickboards58
Install the Gaskets58
Check the Interior Panel Alignment60
Install the Threshold60
Install the Table Top61
Install the Monitor Arm (Optional)62
Install the Touch Screen Holder and Touch Screen62
Assemble the Sofas65
Finalize the Installation66
Prepare the Pod for Use66
Fill out the Installation Report in the Service Tool App66

Framery Four - Install the Coat Hook(S) (Optional)

Table of Contents

Related product manuals