7 | Filling and emptying Franke Kaffeemaschinen AG
36 User manual A800
7.3.2 Cooling unit SU12/UT12
1. Open the door.
2. Switch on the cooling unit.
ð The current cooling chamber temperature
is displayed.
3. Only pull out the milk container until the point
where the sliding cover of the container lid is
fully visible.
4. Push the sliding cover backwards.
5. Fill the milk container with cooled milk.
6. Close the sliding cover.
7. Push the milk container all the way into the
cooling chamber.
8. Close the door.
7.4 Filling the Flavor Station
The on/off switch of the Flavor Station FS is located inside, on the left-hand side of the rear panel.
1. Use the key to unlock the Flavor Station.
To Next Page
Loading...
