21
An acoustic signal sounds at the end of cooking; to silence it, press any button or allow the signal to continue
for its duration.
Acoustic signal frequency modification
Press the + and – buttons (from the time modification menu) together, then press Mode or Set to select the menu for
modifying the acoustic signal frequency. When the message “tonX” appears, the acoustic signal frequency can be
modified by repeatedly touching the Mode or Set button.
Semiautomatic programme with duration or end time
Programme time setting
Select the programme duration or end time and set the required time with the + and – buttons. During duration or end
time adjustment mode selection, the corresponding Auto symbol flashes.
Once a programme duration is set, the end time cannot be decreased. Likewise, the duration of a programme cannot be
prolonged once the end time is set.
Programme run
When the automatic programme is in progress (and therefore the cooking function is active), the Auto symbol remains
lit and the remaining cooking time appears on the display in countdown form. The symbol also remains lit.
Automatic programme end
When the duration has elapsed or the time of day reaches end time the corresponding pan symbol is switched off. At the
end of the automatic programme, the “Auto” symbol flashes and an intermittent acoustic signal (which can be stopped
by pressing any button) sounds.
Timer function
The timer allows the setting of a time from which a countdown begins. This function does not turn the oven on or off,
but only sounds an audible alarm when the time has elapsed.
Press the Mode or Set button once; the display shows:
The bell symbol flashes. Set the alarm duration with the + and – buttons.
At the end of the time an acoustic signal (which can be stopped by pressing any button) sounds.
Modifying/deleting data
• The set data can be changed at any time by pressing the + and – buttons together.
• Cancelling the cooking duration automatically ends the function, and vice versa.
• In case of programmed operation, the appliance will not accept end of cooking times prior to those of start of cooking
proposed by the appliance itself.
N.B.: The oven stays hot at around the set cooking temperature for a long time after it has been switched off;
therefore to avoid overcooking or burning the food, it is advisable to remove it from the oven.
To Next Page
Loading...
