EasyManua.ls Logo

Franke FAK 607 - Page 9

Franke FAK 607
68 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN
9
9
USE
Control board
Key Function Display
A
Switches the extractor motor on and off at the latest
selected speed
Indicates the selected speed.
B
Decreases the suction speed.
C
Increases the suction speed.
D
By pressing this key it is possible to activate the
intensive speed from any previously selected speed.
The intensive speed can be activated even when
the motor is OFF. This speed has been timed at 10
minutes. After that time the system activates auto-
matically the latest selected speed. This function is
suitable for cooking conditions when vapours and
smells are of the utmost emission.
HI appears. The spot down on the right side flashes
once a second.
E By pressing this key it is possible to set up the motor
to a suction speed at 100 m
3
/h lasting 10 minutes
every hour. After this the motor switches off auto-
matically.
When the filter saturation is going on it is possible to
reset the alarm by pressing this key for about 3 sec-
onds. The indication is visible only when the motor
is off.
Indicates the 24-function. The spot down on the
right side flashes and the motor is on.
Once the process is finished the previous indication
disappears:
FF Indicates that the metal grease filters satura-
tion alarm has been triggered, and the filters
need to be washed. The alarm is triggered af-
ter 100 working hours.
EF Indicates that the charcoal filter saturation
alarm has been triggered, and the filter has to
be replaced; the metal grease filters must
also be washed. The charcoal filter is trig-
gered after 200 working hours.
F
By pressing this key it is possible to set the delayed
shutdown of the appliance to 30 minutes. This func-
tion is suitable for a complete elimination of the re-
sidual smells. It can be activated at any position,
and it is deactivated by pressing the key again or by
switching off the motor.
Indicates alternately the selected speed of the hood
and the time left before the hood shutdown. The
spot down on the right side flashes.
G
Turns light on and off .
When pressed for about 2 seconds the upper light-
ing switches on (only in the 90 cm hood version).
H
Turns light on and off at reduced intensity.
A
B
C
D
E
F
GH

Related product manuals