14
ELECTRIC INDUCTION COOKING
SELECTED MODELS ONLY: (FIXG903B1, FIXG905B1)
PROCEDURE TO START PARBOILING - INDUCTION
_______________________________________________________________________________________________________________________
Automatic parboiling is activated by turning the knob anti clockwise briefly, the `A` symbol will appear. The required on-boiling
stage is selected by turning knob clockwise which is shown on the display. The `A` symbol appears after 1 second upon
releasing
the knob.
The on-boiling stage can be adjusted within 15 seconds after activation without cutting off the parboiling boost. If another
selection is made after 15 seconds the knob can be used to select an even lower on-boiling stage which however cuts off the
Automatic parboiling function at the same time.
Turning the knob higher on boiling stage (even after the above 15 seconds) can be selected. This leads to the parboiling time
being automatically brought in line with the currently selected on-boiling stage.
Once the parboiling has ended only the selected cooking stage is indicated on the display.
BOOSTER FUNCTIONS - INDUCTION
_______________________________________________________________________________________________________________________
The `Booster` function for the burner is enabled by turning the knob clockwise. When this function is enabled, the display
shows the letter `P`.
By means of this function the cooking zone is enabled to receive power > 100%.
The Boosting time is limited to 10 minutes to protect cooking utensils. After the booster is switched off automatically, the
cooking zone continues operation on nominal power. The booster can be reactivated provided that the temperature sensors in
the electronics and if the coils have the capacity.
When a pan is removed from the cooking zone during boosting, the no pan symbol is displayed and boosting time continues to
count down. When a pan is replaced within the boost time it will reactivate.
If the booster temperature limit of the electronics or coil on the boosted cooking zone is exceeded, the booster is cut off
automatically and reset to nominal power. While one of the two temperature limits remains exceeded the booster cannot be
activated. In this case the booster is indicated when the knob is turned clockwise which is followed by an automatic reduction
on the display.
Child lock function on HIXG905B1 is activated by turning control knob clockwise until an “L” symbol appears. Repeat this
process to unlock.
This is the same process for the HIXG903B1 using the far right control knob.
PAN SENSOR - INDUCTION
_______________________________________________________________________________________________________________________
This feature is able to recognize the presence of a pan that according to the scale of the EN Standards is one size smaller than
the nominal diameter of the burner. If no pan is detected or if an unsuitable pan is detected the no pan symbol is displayed.
If the no pan symbol appears when a pan is actually on the burner this generally means that the size or shape of the pan
concerned is unsuitable.In this case check whether the type of pan is suitable for induction cooking.
To Next Page
Loading...
Need help?
General
