18
POWER SELECTION ZONE “SLIDER” AND TIMER SETTING ZONE
To select the power with the slider, slide your finger on the “SLIDER” zone. You can directly access if you put your
finger directly on the chosen level.
STARTING-UP
Start up/switch off the hob:
Action Control panel Display
To start press key [ 0/I ] [ 0 ]
To stop press key [ 0/I ] nothing or [ H ]
Start up/switch off the hob:
Action Control panel Display
To set slide on the “SLIDER” [ 1 ] to [ P ]
(adjust the power) to the right or to the left
To stop slide to [ 0 ] on “SLIDER” [ 0 ] to [ H ]
If no action is made within 20 second the electronics return to the waiting position.
PAN DETECTION
This cooktop is fitted with an interactive control system that makes it very easy and comfortable to use. After
switching on the cooktop, when you put a cookware on the glass, the control system automatically detects it. This
system also automatically indicates you which slider control to use by displaying a [ 0 ] over it. You then just have to
set the expected cooking level.
The pan detection ensures perfect performance. The induction will not work if:
• There is no pan on the heating zone or if this pan is not adapted to the induction. In this case it is impossible
to increase the power and the display shows [ U ]. This symbol disappears when a pan is put on the heating
zone that is compatible.
• The pan is removed from the heating zone the operation is stopped. The display shows [ U ].
The symbol [ U ] disappears when the pan is put back to the heating zone. The cooking continues with the
power level set before.
After use, switch the heat element off : don’t leave the pan detection [ U ] active.
To Next Page
Loading...
Need help?
General
