EasyManuals Logo

Franke FIG301S1 User Manual

Franke FIG301S1
34 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #19 background imageLoading...
Page #19 background image
19
RESIDUAL HEAT INDICATION
After the heating zone is turned off, or the complete stop of the hob, the heating zones are still hot and
indicates [ H ] on the display. The symbol [ H ] disappears when the heating zones may be touched without danger.
When the residual heat indicators are on, don’t touch the heating zones and don’t put any heat sensitive object on
them. There are risks of burn and fire.
BOOSTER FUNCTION
The Booster function [ P ] and the Double Booster [ ] grants a boost of power to the selected heating zone.
If this function is activated the heating zones work for 10 minutes with an ultra high power. Booster is needed for
example to heat up large quantities of water rapidly, like for noodles
Start up/stop the booster function:
Action Control panel Display
Start up the Booster slide to the end of the “SLIDER” [ P ]
or press directly on the end of
the “SLIDER”
Stop the Booster slide on the “SLIDER” [ 9 ] to [ 0 ]
Start up/stop the double booster function:
Action Control panel Display
Start up the Booster slide to the end of the “SLIDER” [ P ]
or press directly on the end of
the “SLIDER”
Start up Double Booster re-press key [ P ] [ and P ]
Stop the Double Booster slide on the “SLIDER” [ P ] to [ 0 ]
Stop Booster slide on the “SLIDER” [ 9 ] to [ 0 ]
Start up/stop the double booster function:
The table is divided in 2 sets of heating zones, each set having a maximum power.
If the selected heating levels for both zones exceed the maximum available amount of power, the power
management function is automatically reducing the power from one of these zones. The display of this zone is first
blinking; the level is then automatically reduced to the highest suitable position.
Heating zone selected The other heating zone: (example: power level 9)
[ P ] is displayed [ 9 ] goes to [ 8 ] and blinks
It is possible to activate the booster function (or double booster) on several cooking zones at the same time, for this
it is necessary to use the zones in a discriminant way (A-B).

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Franke FIG301S1 and is the answer not in the manual?

Franke FIG301S1 Specifications

General IconGeneral
BrandFranke
ModelFIG301S1
CategoryCooktop
LanguageEnglish

Related product manuals