Konfigurieren
Page 25
Your Spectra X-XL is completely and individually programmable – so that the Spectra X-XL is just as flexible
as you are. We have kept the programming simple to make your job easier. Try it for yourself.
All programming menu items
are shown on the following
pages. Some of these menu
items may not be available on
your Spectra depending on the
configuration.
Adjust Plus Card
The Adjust Plus Card is used to:
operate the machine (restrict access) modify
parameters, store settings.
Navigating within the menu
Insert the Adjust Plus Card into the card reader.
The menu appears.
You can navigate in the menu with +/–. Press
CLEAN to select an option, and press Exit
to quit an option without saving your selection..
Programming keypad
On/Off switch
CLEAN button: Clean button or Save
button (in programming mode)
USB port
Buttons for programming mode:
– button: scrolling through menu
+ button: scrolling through menu
Exit button: Abort key
(without saving)
Card reader
Cover
Konfigurieren
Controls
To Next Page
Loading...
Need help?
General
