Franklin R910 - Page 47

錯誤! 使用 [常用] 索引標籤將 Heading 1 套用到您想要在此處顯示的文字。 44
④ Enter the related parameters as described in the following table.
Parameters
Description
Name
Enter a name for the rule.
WAN port
Set the WAN port.
LAN IP address
Enter the LAN IP address.
LAN port
Set the LAN port.
Protocol
Set which protocol will be used for filtering.
Status
Set how to handle the packet if it matches with the rule.
2. Click Save Changes to save your settings.