EasyManua.ls Logo

FratelliOnofri FREV905D - Connecting the Range to Gas; Step 4: Connect the Range to Gas

FratelliOnofri FREV905D
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
WARNING
Explosion Hazard
Use a new CSA International approved gas supply line.
Install a shut-off valve.
Securely tighten all gas connections.
If connected to LP, have a qualified person make sure
gas pressure does not exceed 14" (36 cm) water
column.
Examples of a qualified person include:
licensed heating personnel,
authorized gas company personnel, and
authorized service personnel.
Failure to do so can result in death, explosion, or fire.
Safety Instructions
Operating Instructions
Care and Cleaning
Installation InstructionsTroubleshooting Tips
32
Installation of the range
Read these instructions completely and carefully.
The house piping and connector used to connect the range to the main gas supply must be
clean, free of metal shavings, rust, dirt or liquids (oil or water). Contaminants in the supply
lines can work their way into the range manifold and cause failure of gas valves or controls
and clog burners or pilot orifices.
BACK SIDE
RANGE
Appliance
connector
1/2" NPT
Step 4 Connect the Range to Gas

Table of Contents