Ty p e o f G a s
Observe all governing codes and ordinances.
IMPORTANT: This installation must conform
with all local codes and ordinances. In the
absence of local codes, installation must
conform with American National Standard,
National Fuel Gas Code ANSI Z223.1 - latest
edition.
IMPORTANT: Leak testing of the range must
be conducted according to the manufacturers
instructions.
Natural gas:
This range is design-certified for use with
Natural gas or, after proper conversion, for use
with LP gas. This range is factory set for use
with Natural gas. See Gas Conversions
section. The model/serial rating plate located
on the right side oven door trim has information
on the types of gas that can be used. If the
types of gas listed do not include the type of
gas available, check with the local gas supplier.
LP gas conversion:
Conversion must be done by a qualified service
technician.No attempt shall be made to convert
the appliance from the gas specified on the
model/serial rating plate for use with a different
gas without consulting the serving gas supplier.
See Gas Conversions step 3.
Safety Instructions
Operating Instructions
Care and Cleaning
Installation InstructionsTroubleshooting Tips
33
Installation of the range
Read these instructions completely and carefully.
To Next Page
Loading...