p. 2

AVM Around Vehicle Monitoring System Installation Guide

inView 360 HD Installation Guide

Document Number: XE-SNB100-C00-INSTALLPM-R0A

Contents

Introduction �� 3

How Does the inView 360 HD AVM Work? �� 3

Installation Process �� 4

Preparing for Installation �� 4

Kit Components �� 4

Mounting the ECU �� 7

Accessibility �� 7

Routing Power, Signals, and Buttons �� 7

Placing Cameras �� 8

General Camera Placement Considerations �� 8

Examples of Camera Placement on Commercial Vehicles ��8

Examples of Camera Placement on School Buses ��8

Camera Placement Considerations for Long-Nosed Vehicles �� 8

Camera Placement Considerations for Specially Shaped Vehicles �� 9

Putting the Components Together �� 10

Connecting to the Power Source �� 10

Connecting Cameras to the ECU �� 11

Connecting Monitors and Recorders �� 12

Connecting the ECU to a Standalone (Single) Monitor ��12

Connecting the ECU to a Monitor and a Second Device via the CVBS Connector��13

Connecting the ECU to a HD Monitor (via VGA) and a Recorder (via CVBS) ��14

Connecting the ECU to Up to Three Devices ��15

Connecting the Push Buttons �� 16

Connecting Antennas and an IR Receiver �� 18

Connecting to Vehicle Signals via the View Select Signal Cable Harness �� 18

Next Steps�� 18

Contacting FRC (Fire Research Corporation) �� 19

FRC Customer Service and Product Support: �� 19

Product Information �� 19

Warranty �� 19

FRC InView 360 HD AVM User Manual

Questions and Answers: