EasyManua.ls Logo

FRC InView 360 HD AVM - Camera Placement for Specially Shaped Vehicles

FRC InView 360 HD AVM
19 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
p. 9
AVM Around Vehicle Monitoring System Installation Guide
inView 360 HD Installation Guide
© Safe Fleet | July 2020 | All rights reserved
Document Number: XE-SNB100-C00-INSTALLPM-R0A
Camera Placement Considerations for Specially Shaped Vehicles
Vehicles that have special compartments or equipment in the middle, such as re trucks, might require special
consideration for mounting cameras� Because of the accessories and equipment that is usually added to emergency
vehicles, mounting the cameras high up and in the center might not be an option� The added equipment might block a
camera’s eld of view.
This is a situation where you should consider mounting the camera slightly off center
Vehicle Center
In these illustrations, you can see that the cameras have been mounted slightly off
center to compensate for elements on the vehicle body that could block the camera’s
eld of view.
NOTE: Spacing the Calibration Pads
These images are just representations of camera placement� The orange areas do
not accurately portray the actual camera eld of view. Please refer to your camera
specications for a more accurate representation of the cameras’ elds of view.
NOTE: Images are for illustration only

Related product manuals