EasyManua.ls Logo

freebeat MORPH - Page 29

Default Icon
35 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Temporary voltage drops may occur when using the throttle
and/or pedal assist. It is normal for the voltage to decrease
when riding uphill, regardless of the charge state. Additionally,
if the battery pack is exposed to cold temperatures, the voltage
may be lower. To accurately determine the battery pack's
charge state, release the throttle.
NOTE
1. Turn on the Pedal Assist Control system (PAS).
2. Set the PAS to the desired setting. If you select "off," the pedal assist
control system will be unavailable.
3. Press the PLUS BUTTON/MINUS BUTTON to control the bike's speed.
E. THROTTLE OPERATION
FRONT LIGHT ON:
Push and hold the "LIGHT" button for 2 seconds. The front light will illumi-
nate, and the front light status icon will appear on the screen.
FRONT LIGHT OFF:
When the front light is on, push and hold the "assist up" button for 2 seconds to
turn off the front light. The front light status icon will disappear from the screen.
F. FRONT LIGHT OPERATION
CHARGER SAFETYINFORMATION
1. Keep the charger in a safe place out of reach of children.
2. Before each use, fully charge the battery to prolong its lifespan and
reduce the risk of over-discharging.
3. Only use the chargers originally supplied with your Velotric Bike or a
charger purchased directly from Velotric Bikes for your specific bike's
serial number, as approved by Velotric Bikes.
4. The charger is designed to work with standard home AC power outlets
G. BATTERY CHAROINO OPERATION
When using this product, it is essential to follow basic precautions,
including the following:
a. Read all the instructions before using the product.
b. Always supervise children closely when the product is being used to
reduce the risk of injury.
c. Do not insert fingers or hands into the product.
d. Do not use the product if the flexible power cord or output cable is
frayed, has broken insulation, or shows any signs of damage.
e. This equipment is designed for use at temperatures between -10°C
(14°F) and 40°C (104°F). The battery should only be charged when the
ambient temperature is between 0°C (32°F) and 25°C (77°F). Do not
charge the battery if the ambient temperature is outside this range.
f. Use only the freebeat recommended charger for charging the bike.
SAVE THESE INSTRUCTIONS/CONSERVE CES INSTRUCTIONS.
WARNING
CHARGER SAFETYINFORMATION
1. Keep the charger in a safe place out of reach of children.
2. Before each use, fully charge the battery to prolong its lifespan and
reduce the risk of over-discharging.
3. Only use the chargers originally supplied with your Velotric Bike or a
charger purchased directly from Velotric Bikes for your specific bike's
serial number, as approved by Velotric Bikes.
4. The charger is designed to work with standard home AC power outlets
of 100/240V 50/60 Hz. Do not attempt to adjust the voltage input; the
charger automatically detects and adjusts for incoming voltage.
5.
Avoid contact between the charger and liquids, dirt/debris, or metal
objects. Battery Charging: Ensure the battery is fully charged and
functioning properly. The battery pack must be securely locked onto
the frame battery mount before usage. Make sure to disconnect and
store away the battery charger before riding.
Green Light ON
Red Light ON
CHARGING
FULLY
CHARGED
51 52