ENGINE AND DRIVE TRAIN SYSTEM
3.4-1
____
Check engine fluid levels and systems for leaks - shut
off controls.
____
Check throttle action - start and stop controls, cable
clamps, and locknut.
____
Check shifter cable clamps and locknuts.
____
Check exhaust system soundness, hose clamps, and waterlock
cannister.
____
Check coolant system, hose clamps, intake, and filters.
____
Check transmission shift lever action, control wirage,
fluid level, and alignment.
____
Check trueness of shaft, coupling, and prop attachment.
____
Check shaft log tube integrity, packing, hoses, and clamps.
____
Check strut bolt attachment, cutlass bearing, and shaft bolts.
____
Check all engine wire connections.
KEELS
ie *
____
Check keel bolt nuts for tightness (on cradle to 90 f^ot pounds).
PLUMBING
____
Check bilge pump function, hose clamps, and strainer.
REPAIRS
All necessary repairs should be completed before continuing
to use the boat.
*Do not arbitrarily tighten keel bolts. Adjustment may break
bedding compound bond and cause leakage.
To Next Page
Loading...