INTERIOR MAINTENANCE
8.2
As on .the deck, the interior gel coat surfaces should be cleaned
periodically with non-abrasive cleansers and smooth areas
should be waxed. Use a coating such as Armor All to maintain
the non-skid areas.
All solid and plywood teak surfaces have been oiled prior to
delivery. If more oil is desired, it can be easily applied with
a foam brush or sponge. For an even finish the oil should be
rubbed with a rag shortly after application. The factory applied
oil finish on the teak makes a good base for varnish if so desired.
(Be sure any rag having even a trace of teak oil is removed from boat.)
The bilges are painted with epoxy paints. They should be washed
regularly to prevent the growth of mildew which can foul the bilge
pumps.
The interior and exterior stainless steel surfaces can be treated
with Neverdull or other light abrasive stainless steel cleansers.
Toothpaste also works well as a cleanser for this purpose.
To Next Page
Loading...