Freenove 4WD Smart Car Board for Raspberry Pi

Need support?  support.freenove.com
17
Chapter 0 Raspberry Pi Preparation
█ www.freenove.com
Chapter 0 Raspberry Pi Preparation
Install a System
Firstly, install a system for your RPi.
Component List
Required Components
Raspberry Pi 4B / 3B+/ 3B /3A+ (Recommended)
5V/3A Power Adapter. Different versions of
Raspberry Pi have different power requirements.
Micro USB Cable x1
Micro SD Card (TF Card) x1, Card Reader x1
This robot also supports the following versions of the Raspberry Pi, but additional accessories need to be
prepared by yourself.
Raspberry
Additional accessories
Raspberry Pi Zero W
Camera cable(>25cm) for zero w, 15 Pin 1.0mm Pitch to 22 Pin 0.5mm
https://www.amazon.com/dp/B076Q595HJ/
Raspberry Pi Zero 1.3
wireless network adapter,
Camera cable(>25cm) for zero w, 15 Pin 1.0mm Pitch to 22 Pin 0.5mm,
OTG cable (USB Type micro B to USB Type A)
Raspberry Pi 2 Model B
wireless network adapter
Raspberry Pi 1 Model A+
wireless network adapter
Raspberry Pi 1 Model B+
wireless network adapter