Windows OS Remote Desktop
The windows built-in application remote desktop corresponds to the Raspberry Pi xrdp service.
Download the tool software Putty. Its official address: http://www.putty.org/
Or download it here: http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html
Then use net cable to connect your RPi to the routers and ensure your PC and your RPi are in the same LAN.
Then put the system Micro SD Card prepared before into the slot of the RPi and turn on the power supply
waiting for starting RPi. Later, enter router client to inquiry IP address named “Raspberry Pi”. For example, I
have inquired to my RPi IP address, and it is “192.168.1.108". Then open Putty, enter the address, select SSH,
and then click "OPEN", as shown below:
There will appear a security warning at first login. Just click “YES”.
To Next Page
Loading...
Need help?
General