Freenove ESP32-S3 - Page 96

Any concerns?  support@freenove.com
Chapter 6 TCP/IP
94
www.freenove.com █
Serial Monitor
Processing：
Open the “Freenove_ESP32_S3_WROVER_Board\Sketches\Sketches\Sketch_06.2_WiFiServer\
sketchWiFi\sketchWiFi.pde”.
Based on the messages printed by the serial monitor, enter correct IP address and serial port in Processing to
establish connection and make communication.
IP address and
serial port
Enter IP address and
serial port of the serial
monitor.