27
IMPOR
TANT!
The device receiving the data (PC/Laptop/
FRIATEC Memory-Stick, printer) must be con-
nected before you access submenu „Transfer“.
IMPOR
TANT!
FRIATEC does not accept any liability for the use
of standard USB memory-sticks. Please use the
FRIATEC Memory-Stick.
If the data transfer has been prepared correctly, you
will be able, after pressing the START button, to
select either „ALL“ or „SELECTION“ in the submenu
„Transfer“. If you select „ALL“ using the START but-
ton, all the data from your fusion unit will be trans-
ferred. If you confirm „SELECTION“ using the
START button, you will be able to select from indivi-
dual commission numbers. During the data transfer
the fusion unit will display the text „TRANSFERRING
PLEASE WAIT!“ and once transfer has been suc-
cessfully completed „TRANSFER COMPLETE“.
IMPOR
TANT!
Do not switch off your FRIAMAT
®
prime during
data transfer.
5.5.2 Delete
The submenu “Data” will take you to “Delete”. In
submenu “Delete” you will be able, after pressing
the START button, to select either „ALL“ or
„SELECTION“. If you choose „ALL“ using the
START button, all data in your fusion unit will be
deleted. If you confirm „SELECTION“ using the
START button, you will be able to select from indivi-
dual commission numbers and delete them one at a
time.
FT_2377e_II_07_GB.qxd 13.02.2007 12:31 Uhr Seite 27
To Next Page
Loading...
