FRIATEC FRIAMAT BASIC ECO - Page 39

39
W
arning messages/Info:
Text in Display Instruction/Remedy
Faulty / Use new barcode of fitting
incorrect barcode built in the same way or
correct the entered code
manually.
Let the unit Protective function
cool down designed to prevent over-
heating of unit. Switch unit
off and leave to cool down
until warning no longer
appears when switching it
on again.
Fusion interruption Fusion interrupted by
pressing STOP button.
End of fusion Fusion completed.
Voltage ...V; Readjust generator and
Frequency ... Hz confirm by pressing STOP
button.
Memory empty Only with prime eco:
printing out not possible if
memory is empty.
Memory full Only with prime eco:
print out report.
Maintenance date Contact authorized service
exceeded station. Arrange for unit to
be serviced.
8. Appendix
8.1 Recommended accessories
- FRIATEC Memory-Stick (USB) to transfer fusion
data from fusion unit to PC/Laptop (only with
FRIAMAT
®
prime eco)
- FRIATRACE from version 5.1 for the electronic
processing of fusion data (only FRIAMAT
®
prime
eco, optional)
- Operator pass (only FRIAMAT
®
prime eco,
optional)
- Remote control pass (optional)
FT_2377e_II_07_GB.qxd 13.02.2007 12:31 Uhr Seite 39