EasyManua.ls Logo

Fridgemaster MBC54228F - Protecting the Environment and Advice for Disposal; Deciding Where to Locate Your Fridge; Freezer; Reverse the Door Hinge; Installing Your Appliance

Fridgemaster MBC54228F
21 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
User’s manual
The user manual apply to several models, for this reason
there may be some differences in the details given,
according to the type of the appliance.
1
Protecting the environment / advice for disposal
Packing
serves to protect the appliance during transportation and
recyclable materials have been used for packaging.
Corrugated board/cardboard (mainly from waste paper)
shaped parts in PS (foamed CFC-free polystyrene)
foils and bags in PE (polyethylene)
strapping tapes in PP (polypropylene)
Please hand over all packaging to the nearest official
collection point, so that all the different materials can be re-
used or recycled as far as possible and any illegal
depositing of such materials is thus avoided.
2
Deciding where to locate your appliance
In order to avoid any damage or injury to persons or things,
the appliance should be unpacked by two people and placed
in the chosen location
Before positioning it, check that your new appliance has
no visible outer damage.
On no account should you start up your appliance if it
is damaged.
Check the appliance carefully for:
Damage to the packaging, which might indicate that the
appliance has been mishandled during transportation.
Damage to the outer casing
Any visible damage to the cable / plug
If in any doubt let, the customer service department check
the appliance.
It must at all costs be avoided, that any environmentally
damaging refrigerant leaks out by starting up the appliance.
4
Installing your appliance
2) Remove the upper door.
4) Remove the bottom door.
3
Reverse the door hinge
1)
Remove the upper plate and hinge by screw driver.
3) Remove the middle hinge and its connecting pin
underneath
.
5) Remove the right bottom hinge and left plastic plugs,
and refit them onto the opposite side.
6) Use the opposite hinge and cover and fit into the left
bottom.
7) Reassemble the doors and hinges workings from
bottom to top, from 1-4.
1
2
3
4
1) Insert the appliance into the wooden furniture, placing
it on the opposite site of the hinges, and make sure 3-5
mm distance gap.
6

Related product manuals