6
.devreser sthgir llA.cnI ,stcudorP emoH xulortcelE 9002
Operating Instructions
(continued)
7. To shut the unit down, press the ON/OFF button.
Operating Instructions
Fault Codes
2.If the display reads "F0" , check the following operating conditions. Outlet voltage should be 115V±10% and the
1. If the display reads "F1", "F2" or "L1" error codes, please turn off and unplug the unit, then plug it in again
in 30 minutes. If the unit malfunctions again, please contact your Authorized Frigidaire Service Center.
surrounding temperature should be with in the range of 41 °F (5 °C) to 90 °F (32 °C). Unplug the unit and plug it in
again under normal operating conditions. If the "F0" code persists, contact your Authorized Frigidaire Service Center.
F1
F0
After a power outage, the unit will memorize the last setting and return the unit to the same setting once
power is restored.
NOTE:
To Next Page
Loading...
