FRIGOGLASS ISLIM - Care & Cleaning; Troubleshooting

ENG
11
• Wipe moisture off the products you place in the ICM.
• Avoid opening the door for long pe
riods of time.
4. Care & cleaning
Prior to any cleaning (inside or outside the device) procedure, unplug
the ICM! Remove the plug and make sure that the operator can check
from any of the points which he has access to, that the cable is
unplugged.
Never use a water hose or high pressure jet to clean the cooler.
It is important to clean the merchandiser twice a year. In order to avoid mould formation, odours, etc.
product compartments must also be thoroughly cleaned. The interior of the ICM should be cleaned
with a mildly soapy cloth and the glass surface using a window-cleaning agent.
 In case the merchandiser is placed in very dusty and/or greasy
environment, the regular cleaning of the condenser by an
authorized technician is mandatory.
 Keep the cooler in a stable position during cleaning, do not step on
or lean over the cooler.
 Do not clean with sharp objects, flammable or corrosive liquids or
sprays.
5. Troubleshooting
ALL ACCESS TO THE COOLING SYSTEM AND ELECTRICAL PARTS
(CHANGING LIGHTING OR REFRIGERATION DECK) MUST BE
PERFORMED BY AUTHORIZED SERVICE PERSONNEL ONLY.
ISLIM [R600a] is equipped with HC refrigerant. All service
operations on cooling mechanism & gas charging should be
performed in a well ventilated environment or in open air. Do
not smoke during maintenance.