FRIGOGLASS ISLIM - Guidelines to Prevent Corrosion of the Cabinet

ENG
16
3. Refrigeration System:
 Check that the compressor is functioning properly.
 Check the starting relay, the overload and the capacitor. The Supplier recommends that the
compressor's starting relays and o
verloads be replaced every 3-4 ye
ars.
 Check the fan motor condenser and fan motor evaporator.
 Check that the thermostat or the electronic controller and its components are functioning properly.
 Check the cooling performance of the ICM.
 Check the cooling circuit using the appropriate leak detector in case there is any concern or sign
of refrige
rant lea
k.
APPENDIX C
GUIDE
LINES TO PREVENT CORROSION OF THE CABINET
1.
Avoid damages resulting from improper installation & operation, improper maintena
nce & cleaning,
as well as improper handling and
transportation, as per paragraphs 3, 4 and the App
endix A
above.
2.
Do not perform unauthorized adaptations, modifications or ad
justments to the cabinet.