Froling FHG Turbo 3000 User Manual

Operating Instructions
FHG Turbo 3000
Read and follow the operating instructions and safety information.
Edition: 02/2005
Fröling Heizkessel- und Behälterbau Ges.m.b.H, Industriestraße 12, A-4710 Grieskirchen
Tel. +43 (0) 7248 606-0 Fax +43 (0) 7248 606-600 info@froeling.com www.froeling.com

Froling FHG Turbo 3000 Specifications

General

Brand	Froling
Model	FHG Turbo 3000
Category	Boiler
Language	English

Summary

2 Safety

2.1 Permitted Uses and Fuels

Defines the approved fuels and authorized operators for the boiler.

2.2 Safety Information and Regulations

Details safety regulations, approvals, and system requirements.

2.3 Safety Devices

Overheating Prevention Devices

Details the thermal discharge safety device, safety temperature limiter, and safety valve.

2.4 Residual Risks

Handling Burn and Gas Hazards

Warns about touching hot surfaces, opening doors during operation, and using unauthorized fuels.

2.5 Emergency Actions

Emergency Response Procedures

Outlines steps to take if the system overheats and safety devices fail.

3 Operating the System

3.1 Initial System Start-up

Guides the initial setup process with an authorized installer.

Heating System Checks

3.2 Heating Up the Boiler

3.2.1 System Power-Up

3.2.2 Boiler Activation

3.2.3 Fuel Loading and Ignition

3.2.4 Boiler Control and Adjustment

3.2.5 Fuel Refilling and Storage Tank Operation

3.2.6 System Shutdown

4 Boiler Maintenance

4.1 Inspection, Cleaning, and Maintenance

Outlines general maintenance procedures and safety precautions.

4.1 Inspection, Cleaning, and Maintenance

Checking Thermal Discharge Safety Device

Checking System Pressure

4.1.3 Monthly Maintenance Tasks

4.1.4 Annual Maintenance Tasks

4.3 Emissions Measurement Instructions

Emissions Measurement Procedures and Conditions

5 Troubleshooting

5.1 External Faults

Lists external issues like pressed emergency stop or tripped fuses.

5.2 Internal Boiler Faults

Describes internal faults indicated by status LEDs or fault messages.

5.2.1 Resetting Safety Temperature Limiter (STB)

Manual procedure to reset the safety temperature limiter after it triggers.

5.2.2 Acknowledging Fault Messages

Steps to acknowledge and clear fault messages after resolving issues.