Froling FHG Turbo User Manual

Assembly Instructions
Combustion chamber for FHG/S3 Turbo
(from year 1995)
Translation of the original German installation instructions for technicians
Read and follow the instructions and safety informations!
Technical changes, typographical errors and omissions reserved!
M1410012_en-us | Edition 6/10/2014
Froling GesmbH | A-4710 Grieskirchen, Industriestraße 12 | www.froeling.com

Froling FHG Turbo Specifications

General

Fuel Type	Wood
Fuel	Wood
Control system	S3200
Heat exchanger material	Steel
Emissions	Low emissions

Summary

General Information

Disposal Information

Guidance on environmentally sensitive disposal of the system and its components according to regulations.

Replacing the Combustion Chamber

Materials Supplied for Replacement

Lists the specific parts included for replacing the combustion chamber, such as bushings, seals, and adapter pipes.

Required Tools and Materials

Details the necessary tools like screwdrivers, grinders, and materials like lubricant for the replacement procedure.

Removing the Old Combustion Chamber

Step-by-step instructions for safely dismantling and removing the existing combustion chamber from the boiler.

Specific Steps for 1995-2000 Boilers

Describes extra procedures needed for boilers built between 1995-2000, involving secondary air pipes and adapter pipes.

Installing the New Combustion Chamber

Detailed instructions for correctly fitting the new combustion chamber, including seal placement and securing.

First-Time Heating Up Procedure