Boiler Maintenance
Cleaning and Maintenance
Fröling Heizkessel- und Behälterbau Ges.m.b.H, Industriestraße 12, A-4710 Grieskirchen Page 19
Tel. +43 (0) 7248 606-0 Fax +43 (0) 7248 606-600 info@froeling.com www.froeling.com Edition: 23.03.2005
4
Checking the soundness of door seals
U Close the respective door and check its seal
U Check seal D for perfect alignment on the door frame
´ Imprint in the seal
If the seal is coloured black at several points or the imprint is
interrupted:
´ The seal is no longer efficient.
´ Tighten the door latches or replace the seal
Cleaning the flue gas pipe
U Clean the connecting pipe between the boiler and the chimney with a chimney sweep’s
brush
Very important for flat flue gas pipes!
Checking the draught controller flap and explosion flap
U Check the draught controller flap and explosion flap for ease of operation
Maximum allowable setting: 30 Pa
Ideal setting: 20 Pa
4.2 Service Agreement
Guarantee a long service-life with a service agreement!
Regular maintenance and servicing by a heating specialist will ensure a long, trouble-free
service life for your heating system. Regular servicing will ensure that your system stays
environment-friendly and operates efficiently and cost-effectively.
For this reason, FRÖLING offers a service agreement that guarantees trouble-free functioning
of the boiler and the safety systems. Please see the details in the accompanying guarantee
pass. Your Fröling customer service office is also glad to provide consultation.
D
To Next Page
Loading...
Need help?
General
