Fromm FS360 Series - Technical Specifications; Machine Performance and Conditions; Pallet and Colour Specifications

FROMM SERVICE MANUAL FS360_EN01 Version00.doc
For further updates, see our website www.fromm-stretch.com and Login!
It is forbidden to duplicate this manual or parts thereof or any other form without the author’s authorisation © 2018
20
TECHNICAL DATA
Machine - Turntable speed from 6 to 12 rpm
- Carriage speed from 2 to 4 meters/minute
- Capacity of pallets per day depends on high/low rpm, pallet
height and wrapping mode
- Hours of operation 8 h/day, 5 days/week
- FS360 Sealing height maximum of 2100mm / 82.67”
maximum of 2500mm / 98.42”
- Max . load capacity in Ø1500mm 1500kg
- Max . load capacity in Ø1650mm 2000kg
- Max . load capacity in Ø1500mm Open turntable 1250kg
Conditions - Environmental temperature + 5 to +45
o
C
- Environment clean, dry and not corrosive
Electrical
System - Power supply 1 x 230 V 50/60Hz
- Control voltage 24 Vdc
- Turntable motor 0.55kW
- Mast motor 0.18kW
- Film carriage motor 0.37kW
- Installed power 1.1kW
Goods on pallet
- Pallet dimensions (Length x width) Ø1500mm 800 x 1200 x 140
31.5” x 47.24” x 5.51”
- Pallet dimensions (Length x width) Ø1650mm 1100 x 1200 x 140mm
43.30” x 47.24” x 5.51”
Colours - Base : Blue,finish sablè RAL5010
- Turntable disk : Yellow,antislip finish RAL1021
- Mast : Blue,finish sablè RAL5010
- Bracket carriage : Yellow,finish smooth RAL1021
- Carriage frame : Yellow,finish smooth RAL1021
- Control station : Light Grey,finish smooth RAL7035
If you have to work with products of a different type than previously indicated, contact the
MANUFACTURER’S technical assistance service to receive written authorisation.