Fronius 63A-1 - Electrical Cabling; Data Communication Cable Connection

(c) Fronius Australia Pty. Ltd, 2015 9/10
2.2 Activate the meter on the Fronius Datamanager web interface
The dynamic power reduction can be set on the web interface of the Fronius Datamanager as shown below.
/ On the Datamanager web interface select Settings
/ Before it is possible to enter the METER settings a service password is required. If no service password has
been set, it needs to be created first!
Go to ‘METER’ to do the
relevant settings.
Important! If no service
password has been set:
Choose a service password
under PASSWORDS.
Go to ‘Settings’.