Fronius 63A-1 - Connecting to GEN24 Inverter

(c) Fronius Australia Pty. Ltd, 2015 10/10
/ Choose the type of meter.
/ Choose the installation location.
For further explanations on feed-in path and consumption path see chapter 1.2 Where to put the Fronius Smart
Meter
/ The meter is activated once you get the following message. Click OK!
Done!
For more information on the Fronius Datamanager V2 please see the Operating Instructions on the Fronius
website under Solar Energy / Products / System monitoring / Datalogging /Fronius Datamanager 2.0
or click: http://www.fronius.com/cps/rde/xbcr/SID-DBD64F5C-
18F6818F/fronius_australia/42_0426_0191_EA_388899_snapshot.pdf
Select ‘Fronius Smart Meter’
Select whether the meter is
located in the feed-in path or in
the consumption path
Save the setting by
clicking the tick!