Fronius TS 5kA-3 User Manual

Op erating
Instructions
Fronius Smart Meter TS 5kA-3
42,0426,0348,EN 013-25052022
EN
Operating Instructions

Fronius TS 5kA-3 Specifications

General

Category	Measuring Instruments
Model	TS 5kA-3
Output Signal	4 - 20 mA
Protection Class	IP20
Mounting	DIN rail
Type	Current Sensor
Current Range	0 to 5000 A

Summary

Safety Rules

Explanation of Safety Notices

Explains the meaning of danger, warning, and caution safety notices.

General Safety Guidelines

General safety rules for device operation, personnel, and equipment.

General Information

Device Description

Details the device's function, markings, and safety symbols.

Installation

Checklist for Installation

A step-by-step checklist for installing the Fronius Smart Meter TS.

Installation and Mounting

Protective Circuit and Auxiliary Power Supply Cabling

Cabling

Provides instructions and diagrams for connecting the device cables.

Selection Criteria for Current Transformer

Connecting the Current Transformers

Detailed steps for connecting current transformers to the meter.

Suitable Voltage Transformers

Connecting the Data Communication Cable to the Inverter

Connecting the Terminating Resistor

Configuration Menu - Structure and Parameters

Setting the Transformation Ratio of the Current and Voltage Transformers

Guides on setting current and voltage transformer ratios.

Setting the Address on the Fronius Smart Meter TS

Instructions on setting the Modbus address for the meter.

Start-up

Meter Configuration (Primary/Secondary)

Steps to configure the meter as either a primary or secondary meter.