Fronius FK 4000 - Application Areas; FK 4000 Cooling Unit Compatibility; FK 4000 R Series Welding Applications

20
Application areas
FK 4000 The cooling unit is recommended for use with:
- TransPuls Synergic 2700
- TransSynergic 4000 and TransPuls Synergic 4000, max. length of the interconnecting
hosepack 5 m (16 ft. 5 in.)
- TransSynergic 5000 and TransPuls Synergic 5000, max. length of the interconnecting
hosepack 1.2 m (4 ft.)
NOTE!
The cooling unit is supplied with the auto-transformer FK 4000 option as standard.
FK 4000 R, FK
4000 Rob, FK
4000 R FC, FK
4000 R US
The cooling units are recommended for use with:
- TransSynergic 4000 and TransPuls Synergic 4000, length of the interconnecting
hosepack over 5 m (16 ft. 5 in.)
- TransSynergic 5000 and TransPuls Synergic 5000, length of the interconnecting
hosepack over 1.2 m (4 ft.)
- PullMig or PushPull hosepacks
- Multilock hosepacks
- Robacta machine hosepacks
- Robacta or Robacta Drive robot hosepacks
- TIME and JobMaster welding torches
- MIG/MAG pulsed arc welding
- Welding in a higher power range
- Robot welding
Additional information for FK 4000 R FC:
- The flow sensor with coolant filter option is fitted as standard in the cooling unit
Additional information for FK 4000 Rob:
- The flow sensor with coolant filter option is fitted as standard in the cooling unit
- The thermostat option is fitted as standard in the cooling unit
Additional information for FK 4000 R US:
- The flow sensor with coolant filter option is fitted as standard in the cooling unit
- The FK 4000 auto-transformer option is fitted as standard in the cooling unit
- The cooling unit is intended for the American market. The other cooling units are not
available on the American market