134
Replacing the RECERBO display PC board
Replacing the RE-
CERBO display
PC board
Removing the RECERBO:
Remove the inverter from the wall bra-
cket, open, and remove the Datamana-
ger card (see "Opening and Closing
the Device" and "Replacing the Data-
manager Card" sections)
Remove the external fan cable from
the cabling (1).
Push the locks (2) on the RECERBO
holder upward
Remove the RECERBO assembly
Remove the holder (3) from the
RECERBO
Remove the breakaway PC board (4)
from the faulty RECERBO
Installing the RECERBO:
(1)
(2) (2)
WARNING! An electric shock can
be fatal. Follow the safety rules
(see start of "Safety" chapter).
1
2
3
4
(4) (3)
NOTE! In the next two steps, en-
sure that no components are dam-
aged.
5
6
To Next Page
Loading...
