Serial Number Sticker for Customer Use
Serial number
sticker for cus-
tomer use
The serial number of the inverter is
located on the rating plate on the bot-
tom of the inverter.
Depending on the installation position
of the inverter, the serial number can
be difficult to access or read, e.g. if the
inverter has been installed in a dark or
shaded area.
Two serial number stickers are en-
closed with the inverter's installation
instructions:
* 57 x 20 mm
** 67 x 20 mm
These can be affixed by the customer
in a visible location of his choosing, e.g.
on the front of the inverter or on the
Operating Instructions.
Application example:
Serial number sticker on the Operating
Instructions or on the front of the in-
verter
For Australia only:
Affix the DRM Australia sticker in the
Datamanager area.
43
EN
To Next Page
Loading...
