Fronius Selectiva 1020E - Edge Guard Option; Removing Covers for Connections and Options

15
EN
Edge guard op-
tion
Removing covers
for connections
and options
If necessary, use a screwdriver to remove:
- Cover (1) for connection P3 - visual
port
- Cover (2) for connection P4 - multiport
- Cover (3) for connection P2 - I/O port
Leave covers (1), (2) and (3) in place on un-
used P2, P3 and P4 connections.
1
2
2
NOTE! The edge guard removal
process is the reverse of the fitting
process.
(2)
(3)
(1)