To Next PageTo Next Page
Need help?Do you have a question about the Fronius Selectiva 2040 and is the answer not in the manual?
General| Brand | Fronius |
|---|---|
| Model | Selectiva 2040 |
| Category | Battery Charger |
| Language | English |
Introduces the manual and outlines safety precautions for users.
Information for qualified service engineers regarding scope and procedures.
General safety principles, risks, and operator qualifications for device handling.
Details the meaning of danger, warning, and caution symbols used in the manual.
Identifies safety symbols present on the charger's rating plate.
Covers safety warnings and precautions for components located inside the device.
Information on contacting national technical support for fault analysis queries.
Guidance on how to order spare parts via the online catalogue.
Details necessary protective measures to prevent damage to electronic components from electrical discharge.
Lists the specific tools needed for maintenance and repair tasks.
Lists the essential measuring and testing equipment required for the procedures.
General guidelines and safety precautions before starting component replacement.
Adherence to ESD guidelines when handling electronic components and PC boards.
Step-by-step instructions on how to safely open the device for access.
Detailed procedure for removing and installing the display PC board.
Instructions for safely removing and installing the mains cable.
Procedure for removing and installing the charging leads, including cable lug details.
Steps for removing and installing the device's cooling fan.
Guide for safely removing and installing the internal battery.
Procedure for removing and installing the power module, including handling notes.
Instructions for updating the device software, requiring a USB flash drive.
Procedure for entering serial numbers and checksums for device configuration.
Steps for reassembling the device after component replacement or maintenance.
Outlines the safety inspection process, applicable standards, and general requirements.
Defines technician responsibility and required qualifications for performing safety inspections.
Specifies when a safety inspection must be performed according to standards.
Lists requirements for measuring equipment used in safety inspections.
Guidelines for conducting visual checks of the device components and connections.
Details electrical tests including ground conductor, insulation resistance, and contact current.
Detailed steps and requirements for measuring ground conductor resistance.
Procedure and required values for testing the insulation resistance of the device.
Methods and requirements for measuring ground conductor current.
Procedure for measuring contact current and its acceptable limit.
Steps for performing various function tests within the service menu.
How to perform the fan test, including settings and displayed values.
Steps to measure the charging current and voltage during testing.
Procedure for measuring the device's output voltage.
Additional function checks to be performed in the service menu.
Verifying proper operation of mains power on/off functions.
Checking the functionality of indicators and control elements.
Requirements for documenting completed tests and test records.
