Do not dispose of used devices with domestic waste. Dispose of them
according to the safety rules.
Possible sources of ignition, such as fire, sparks and naked flames, must be
kept away from the battery.
Risk of explosion! Oxyhydrogen is generated in the battery during charging.
Battery acid is corrosive and MUST be kept away from eyes, skin and
clothes.
Ensure an adequate supply of fresh air during charging.
Do not use the functions until you have read all the Operating Instructions.
Warning notices
inside the device
WARNING!
An electric shock can be fatal.
The housing must never be opened by anyone other than a service technician trained by
the manufacturer. The device must be disconnected from the mains before starting any
work with the housing open. A suitable measuring instrument must be used to ensure
that electrically charged components (e.g. capacitors) are fully discharged. Use an easily
legible and understandable warning sign to ensure that the charger is not reconnected to
the mains supply before all the work has been completed.
Inside the device:
2 kW
4,010,xxx
xxxxxxxx
XXXX
WARNING
Hazardous Voltage
Kondensator Entladezeit < 2 min.
Capacitor discharge time < 2 min.
Décharge de condensateur < 2 min.
Condensador tiempo de descarga < 2 min.
Condensatore tempo di scaricamento < 2 min.
UDC nom. xxV
Part No.:
Ser. No.:
1
2
1 Display
2 Battery CR2032
Ext. Start Stopp (1)
Temperature
controlled charging
Not connected (3)
CAN High (5)
(4) Not connected
(6) CAN Termination
(8) CAN Termination
(10) +13V
(2) Ext. Start Stopp
Temperature
controlled charging
CAN Low (7)
CAN GND (9)
National Fronius
Technical Sup-
port (TSN)
Please contact your national Fronius Technical Support (TSN) team with any fault ana-
lysis queries.
Ordering spare
parts
For information on spare parts, refer to the Online spare parts catalogue (OETK) at:
https://spareparts.fronius.com
9
EN