Fronius Symo 17.5-3-M Installation Instructions

Installation location and position
Explanation of
safety notices
DANGER!
Indicates immediate danger.
▶
If not avoided, death or serious injury will result.
WARNING!
Indicates a potentially hazardous situation.
▶
If not avoided, death or serious injury may result.
CAUTION!
Indicates a situation where damage or injury could occur.
▶
If not avoided, minor injury and/or damage to property may result.
NOTE!
Indicates a risk of flawed results and possible damage to the equipment.
Safety
WARNING!
Danger due to incorrect operation and incorrectly performed work.
This can result in serious injury and damage to property.
▶
Only qualified personnel are authorised to commission your inverter and only
within the scope of the respective technical regulations.
▶
Read the Installation and Operating Instructions before installing and com-
missioning the equipment.
WARNING!
Danger due to work that has been carried out incorrectly.
This may result in serious injury and damage to property.
▶
Surge protective devices must only ever be installed and connected by a
qualified electrical installation engineer!
▶
Follow the safety rules.
▶
Ensure that both the AC side and the DC side of the inverter are de-ener-
gised before carrying out any installation and connection work.
5
EN

Fronius Symo 17.5-3-M Specifications

General

AC Nominal Power	17.5 kW
Max. Input Voltage	1000 V
MPPT Voltage Range	200 - 800 V
Number of MPP Trackers	2
Efficiency	98.1%
Frequency	50 / 60 Hz
Protection Class	IP65
Operating Temperature Range	-25°C to +60°C
Max. Apparent AC Power	17, 500 VA
AC Voltage Range	3 x 230 / 400 V
Cooling Method	Forced air cooling